Boiler series BIOmax and BIOmax PRO

BIOmax i BIOmax PRO

Boiler series BIOmax and BIOmax PRO

BIOmax boilers came after many years of experience with pellet boilers series. Of course it is still possible to use other than wood pellets and pitted cherries, cherry, etc...

For other fuels that would use automatic ordering are needed additional adaptation mechanism for dosage, so you should consult our construction department.

OPTION: Wi-Fi modem for wireless combustion control using the smartphone application.

Резултат слика за orange wifi logo   Ð ÐµÐ·ÑƒÐ»Ñ‚ат слика за 4heat tiemme
BIOmax series

Boilers BIOmax 35 and BIOmax 23 came after many years of experience with pellet boilers series. Of course it is still possible to use other than wood pellets and pitted cherries, cherry, etc...

For other fuels that would use automatic ordering are needed additional adaptation mechanism for dosage, so you should consult our construction department.

The last time all the present and agro pellets. This series generators can be used as fuel, but it should be noted that the prescribed power boiler is very dependent on the calorific power of agro pellets and that the process cleaning should be done more frequently as compared to wood pellets, because the larger amount of ash.

One of the main features in terms of universal fuel for BIOmax 35 and BIOmax 23 series is to shift the automatic loading of pellets, the hand-firing wood and coal by only a few seconds. This is remained one of the comparative advantages of our construction, with the difference that now grinders for wood and coal from cast iron and easily interchangeable.

What is it that distinguishes these boilers in a special series?

First of all BIOmax 35 and BIOmax 23 have tube exchangers. The seamless boiler tubes are properly quartered spiral turbulators. This affected both the degree of utilization and the better and easier cleaning. These boilers are within the combustion chamber stainless steel nozzles for the distribution of secondary air. I come from a special air centrifugal fan that has nothing to do with the primary the air. Secondary air quality affects the exhaust gases and dust, which affects the occurrence of severe unburned matter in the changer. Thus, the direct method reduces fuel consumption. The new nozzle design of refractory cast iron that comes through the primary air for combustion.

The new form of nozzles enable a better distribution of air pellet burning. Also nozzles that fire up at the corners of the retort can be inclined at any time and thus reach the nozzle and carried out the air. This is very easy cleaning nozzles.

This structure has the possibility of easily upgrading the fan inlet flue gas and process automation, which dictates burning based on the information on the quantity of air in the flue gases, which sends lambda probe. This is currently possible only on special request.

All these improvements in a series of constructive BIOmax 35 and BIOmax 23 came to an exceptional degree of utilization and combustion chamber and heat exchanger and the percentage goes above 90 percent. limits CO, CO2 and dust particles in the framework of EU standards, so this series has all the prerequisites for obtaining benefits on the EU market because of its economic characteristics.

BIOmax PRO series

BIOMAX PRO boiler belongs to a group of boilers where the pellet enters the combustion chamber from the side. During the transport of pellet from the silo to the combustion chamber, the pellet is transported by the upper and lower screw and by cell transporter between the screws. On the entire route, there is no free fall of the pellet and it is always pushed by the force of the screw. This is an important feature that ensures the reliable functioning of the entire system.

The water portion of the boiler, with its type of heat exchange between flue gases and water, is adjusted to biomass. The exchanger is a three-draft exchanger with vertically placed pipes. Inside the pipe there are spiral turbulators with dual function. The first function is to increase the exchange of flue gases and heat exchanger, while the second function is to mechanically clean the pipe walls. The movement of the turbulators inside the pipes is achieved by electric motors automatically operated at specific intervals.

In the base of the boiler, in the zone below the combustion chamber, there is a screw that expels ash into the ash bin. This screw conveyor is also motor-activated and operated automatically.

The efficiency of the pellet is over 92%. The BIOmax PRO boiler has a copper heat exchanger for thermal safety. All parts of the water portion of the boiler are produced of seamless pipes of ST 35.4 quality and boiler sheets with a thickness of 5 mm. Sheets correspond to the quality prescribed by 1.0425 EU standard i.e. P265GHEUII standard.

The exhaust tube is factory-aligned upwards and can be rotated as needed.

Thanks to the excellent emission levels, the BIOmax PRO complies with the EU requirements for 2020 (EN303-5).
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. OK